The Do’s and Don’ts for Resin Driveways

Sally Flores
Posted in Driveways

When it comes to installing and maintaining your resin driveway, it is important to avoid mistakes that would shorten its life. Properly installed resin driveways looks incredible and can last for a long period of time provided it is done by a professional. When you opt for an uninformed DIY procedure, you may end up with a shabby looking driveway that is placed on the wrong surface. Just imagine the extra costs you would incur on repair or the disaster as a result of accidents on your driveway.

Resin surfaces look fantastic when handled in the right manner but can translate into a disaster with improper care. This is why we came up with a checklist of things to consider when installing and maintaining a resin driveway.

1. Know your installer

Who are you sourcing to install your driveway? If it is a professional and hopefully it is, how credible are they? A professional installer will have a website where they list their services and contact information that will help you make an informed decision. Go to the customer reviews on the site and look for testimonials from other customers as proof of the quality of the services that they offer. Take their contact information and call them up to know who you are dealing with.

Your installer should provide you with:
• A training record to show their credibility for the job.
• Information on the resin materials available, that is, whether is bound or bonded.
• A resin technical data sheet-This is a document provided by all manufacturers that tell you why the selected resin is suitable for your needs.

If you are looking for a resin driveway installer then The Driveway Company could answer all of your questions.

2. Check for the quality of the resin

Inspect the resin like your life depends on it. Ensure that it is non-yellowing or aliphatic. Cheap and low-quality resins are prone to discoloring and cracking especially in the hot and dry weather. They also pose a serious mechanical challenge when it comes to installing.

3. DIY or a Contractor?

The answer will depend on the size of your project and the level of specialization that you need for your resin driveway. You should opt for a contractor if there is a wide area to be covered as they will ensure that high standards are maintained for your resin driveway. One thing to ask yourself is how much do resin driveways cost? The contractor will also be able to spot any unforeseen problems and deal with them appropriately.

If it’s a smaller residential area that is in question, a DIY technique will apply. However, you would need to use the right tools for the job. Your contractor could help you with the purchase of a nice DIY kit that comes pre-packed with your chosen stone aggregate. Your installer could have a few options for a DIY kit on their site.

4. Check for the specification

Many resin surfaces need repairs and re-installations with time due to poor specification when it comes to the bonded or bound surface. In case you went for a bound surface when a bonded one would have been more appropriate, you will suffer the consequences of the mistake. You need to keenly research on the difference between the two types of resin surfaces and their applications. Choose a surface that is more appropriate for your project for the sake of durability. Road surfaces have been created using resin https://en.wikipedia.org/wiki/Road_surface

A resin surface needs to be installed by a skilled technician and prior research needs to be done on the type of resin appropriate for your driveway. Call a professional installer today and get advice on the best way to install and maintain your surface!

Benefits of jet washing your driveway and paving in Cheshire

Sally Flores
Posted in Driveway Cleaning

Keep Clean – Of course, the primary benefit of this procedure is to keep the area clean and will use the right equipment such as high-pressure jet cleaning to get the very best results possible. Preferably a petrol driven machine will provide the best results due to the pressure it can use. The majority of pastime DIY electric jet washer you can purchase from the regional DIY store are not strong enough to finish a deep tidy to many difficult surface areas. Utilizing a gas driven professional grade machine has the power to get rid of most of the stains, lichen using different tools such as the rotary head which is a developed to keep the mess consisted of as much as possible, while the lance is used for the more deep discolorations which need a more concentrated jet. You can rent these petrol driven machines from regional suppliers or call a local pressure washing company who can finish the work in a short area of time. This is the most eco-friendly way to clean your driveway locations as no severe chemicals are utilized at the same time. For further information regarding driveway cleaning companies in Cheshire click the link.

Reduce Future Costs – In the last few years, we have actually seen monetary troubles which sees individuals minimize their spending however they have the tendency to reduce it in the wrong areas. For instance, you should never stop going to the dentist due to the fact that you deal with the risk of missing out on a potential problem before it develops into something even worse. In the same way, you shouldn’t forget to clean and seal your driveway or patio because it will remove the risk of bigger issues occurring in the future.

Reduce Weather Condition Effects – When the snow and ice comes, there isn’t really many individuals who like it however our houses also suffer. With ice in particular, gutters can be harmed as can your driveway. If water gets into fractures then freezes, these cracks will be worsened and, with time, this will ruin your driveway and in fact make it rather dangerous. By sealing, you can restrict the damage that severe weather condition will do. Another example is not to use rock salt if you have actually a stained concrete imprint driveway as this can in fact damage the top layer causing your driveway to become blemished and damaged.

Elimination of Weeds – As we discussed earlier, turf, weeds, and moss development can be a headache for outdoor patio areas so this treatment will guarantee that they will not have their method. Whether it is the origin damage or perhaps simply the lawn above the surface area staining the paving, professional services can eliminate this issue. The best method is to use the pressure washering to complete this work however some persistent weeds may require getting rid of by hand. You can use a weed/moss killer once the drive has dried to make sure that the regrowth to a minimum

Prolong Life – Eventually, all the benefits we have mentioned up until now plus lots of others – oil/stain resistance, better colour of paving, keeping sand in place – all work together to keep your paving healthy and strong. As long as you tidy and seal your driveway, you will not be needing to pay for repairs or a complete replacement for a long period of time! Using expert grade sealant is the very best method forward as this will give the longest lasting finish to exactly what location you opt to seal.

The advantage’s are
– Less danger of expensive future repairs
– Prevents weeds, turf and moss growth
– Lowers loss of sand from power cleaning
– Boosts the colour of paving
– driveway sealers do not blister or peel
– Weather resistant
– Shown to extend life of paving Oil/ stain resistant residential or commercial properties

The process above can be performed by yourself the DIY’er or your regional business who specialize in this sort of work.

The benefits vary for most difficult surface areas;
Block paving
Indian sandstone
Patio Flags
Plain Concrete
Pattern print concrete
Tarmac/Asphalt … and much more!

Thanks for reading.

Please see the following videos from youtube showing how better the rotary head is over utilizing a lance for a large flat area.

Please see the other links i have offered to assist with more infomation concerning pressure cleaning.

Driveway Lighting for Safety

Sally Flores
Posted in Blog

Driveway lighting is something to think about now that fall is around the corner, we no longer have daylight savings time and winter is coming. Some type of outdoor lighting should be used for safety and security since we now come home from work and it is getting dark.

More hours of darkness mean more opportunities for would-be burglars, and it could put you and your loved ones more at risk from suffering an injury in the dark areas around the house. If you do not come home every night until after dark you can use outdoor timers to turn on the lights outside and inside your home. A dusk-to-dawn control that screws in will allow you to convert a lamp post or any traditional light into one that will turn on at dusk and go off at dawn.

The majority of the exterior lights should be outdoor security lighting to brighten up all the entryways into your home. You may want to consider placing motion-detection lights, which come on only when some type of motion is sensed, at the front, back, and side entrances to your home. You may also want to use this type of lighting on a storage shed, a detached garage, a gate, or on a garage door that is attached to the house. If you have a covered porch, you can use a flush mount fixture to an exterior hanging lantern or even a chandelier to illuminate the area and to welcome your quests at the same time.

For those of us without a covered entryway, outdoor wall lighting or wall lanterns can add both safety and decoration to your home. We need to be sure the lights we use are designed for exterior use as it needs a finish that will withstand everything Mother Nature throws at them. If you use a single lantern at an entryway it should be mounted about one-third the height of the doorway; if planning on a matching pair they should be approximately one-quarter to one-half the height of the doorway.

Now that we are receiving more hours of darkness, we will be using more electricity, so we should replace the old incandescent bulbs with CFLs or compact fluorescent light bulbs. These Energy Star-rated bulbs use seventy-five percent less energy and generally last up to ten times longer than the standard light bulbs. We can save roughly seventy dollars a year just by placing CFLs in the most commonly used light fixtures inside our homes.

Low voltage lighting is the kind of outdoor landscape lighting that uses 12 volts instead of 120 volts of electricity. The 12-volt system does not require an electrician for installation which makes them safe and easy to work with, and they are very popular with many homeowners. An added benefit of these lights is that light fixtures can be added to it and adjusted even though they are plugged in and turned on. Outdoor lighting low voltage kits are quite affordable and can be found in hardware stores and home and garden centers.

Solar lighting is relatively new even though it has been around for awhile has captivated homeowners with its wide selection of fixture styles and easy installation and upkeep. Solar outdoor lighting is an excellent way to light up pathways, steps, and pool areas. Solar lights use photocells that charge a NiCad battery during daylight hours and will then power on the light at night. Most solar lighting kits do not have any wiring unless you purchase those that are going to be used to highlight something that is situated in the shade. This type of solar light is equipped with a solar panel attached with a thin wire that goes directly to the light source; the solar panel is then placed nearby where it can reach the rays of the sun.

Deck lighting is specialized outdoor lighting for porches, decks and balconies. The lights are mounted on deck railings, steps, and around the perimeter for safety. In-deck lights are those that can be installed flush with the deck floor and can be walked on without causing any damage. Outdoor string lighting is perfect for illuminating sitting and entertaining spaces. Outdoor lighting can bring a lot of joy to any garden and safety to any home anytime of the year when placed in the proper areas.

Garden Tips for Winter

Sally Flores
Posted in Blog

There are a few garden tips for the winter months that should not be overlooked. These garden tips are not just for your garden, they also include your lawn and landscaping, garden tools, and your feathered friends. Some of the tips will all depend on where you live and the types of winters you have to endure. If you live in Southern Regions with very mild winters you may not need to bring plants indoors.

For your garden you want to bring indoors all the plants that are tender such as any tropical plants that you have in containers. You can re-pot them if need be and display them in a room that receives sufficient sunlight. You can take clippings from your annuals to start new plants to transplant next spring. Dig up any of the summer-or fall-blooming bulbs that need to be stored, now go ahead and plant some spring-flowering bulbs such as tulips. Be sure to plant them with the roots down even if they have started to sprout on the top. If you have a perennial border place roughly 2 to 4 inches of mulch around the plants for added protection. You can leave any ornamental grasses intact by not cutting them back; this will impel the birds to come for a visit.

Depending on your location, winterizing roses can be accomplished in different ways. But an excellent rule of thumb is to remove all the foliage that is around the base or on the rose plants; this will keep any foliage diseases from returning next season. You do want to prune any branches that have signs of infestation or decay and cut off any long stems. Be sure to throw away anything that is diseased; do not throw in your compost pile. A good idea is to spray your roses and the soil that encompasses them with a fungicide; this will protect them through the winter months and help keep any diseases from overwintering. A healthy layer of topsoil, mulch, or compost placed around the graft union will help protect against the cold. Your compost bin can be winterized with a tarp cover so the process of composting will continue through the winter season. Once in a while soak the compost pile with water, this helps keep it moist. You can also add straw or leaves to the side and top of pile for added insulation.

You can lengthen the harvesting of some of the cool season vegetables such as spinach and lettuce by surrounding them with a cold frame. Remove all the healthy vegetable garden waste and add it to your compost pile and throw away waste that is diseased. Turn the soil over by using a garden fork in order to expose any underground pests to the winter temperatures. If you can afford to do so, plant a cover crop because it helps reduce erosion of the soil, it captures nutrients, lowers the amount of weeds, and enhances the soil for next spring.

Fall is an excellent time to fertilize your lawn. Rake up all fallen leaves and place them in the compost pile; if you are fortunate to own a mulching lawn mower it will also work. There are a few steps you need to take to winterize a backyard pond that is made of a pre-formed liner of plastic or flexible vinyl. Cut back the aquatic plants, hardy or tender; bring the tender ones indoors and place in a shallow container that has only a few inches of water and put them near a window that gets plenty of sun. You want to remove the floater plants such as water hyacinth and water lettuce because they probably will not survive over the winter indoors or out. If your pond has fish and is no deeper than two feet, you will need to bring them indoors for the winter. Gather them up in plastic bags that you have filled with pond water. Place the entire bag into the aquarium and allow the water to become equal before removing the fish and placing into the tank. If your pond is deep enough you can leave the fish outside during the winter, but you will need to stop feeding them because their metabolism slows down. Be sure to remove all debris from the pond water.

Your garden tools are next in line if you want to keep them for a long period of time. You want to wash off any dried and hardened dirt from any shovels and hoes. Rub on a little linseed oil to all wooden handles to help prevent them drying out and cracking. Sharpen the blades on the hedge trimmers, shovels, and pruners. It is a good idea to drain all garden hoses and place in garage or garden shed for the winter. If water is left inside the hoses it will freeze and expand; this causes the lining of the hoses to rupture and leak. Repair or replace any leaky hoses and replace damaged or old fittings and washers. Last but not least completely rinse out any pesticide sprayers and grass or fertilizer seed spreaders and allow them to dry thoroughly before storing.

Now you can devise a winter retreat for those feathered friends. You want to provide shelter, food and water as part of their essentials. Keep your bird feeders filled all through the winter season. If you’re going on vacation during the holidays, do not want to spend a lot of money on birdseed or have the time to fill the feeders you can grow shrubs and trees that bear fruit that will be naturally tasty to the birds. If you have any ceramic birdbaths you want to drain and clean them before you bring them indoors. All other birdbaths need to be cleaned and then keep them filled with water. You want to provide some shelter for the bird with birdhouses. You can even place nest-making materials, such as dried grass, twigs, hair and yarn around the backyard for them to collect. Hopefully I was able to give you some help with these winter garden tips.